Tape-thread valve

Settings

Per complete box pack In bag packs  
Ref. Diameter Box Units in box Bags in box Ref. Units in bag packs
1099 16 mm – 1/2” C 250 10 81099 25

You can request commercial or technical information about this product .
 

 

Related products

Tape outlet

  • Materials: polypropylene.
  • Assembly: insert the tape through the tapered section of the part up to the stop and turn the nut anti-clockwise (towards the outside) until it compresses the tape.  Ensure that the tape is not twisted.
  • Application: used in tapes of 16-17 mm. Between 0,1 and 0,9 mm thick.

Tape outlet

Materials: polypropylene.

Assembly: 
 - insert the tape through the tapered section of the part up to the stop and turn the nut anti-clockwise (towards the outside) until it compresses the tape.  Ensure that the tape is not twisted.
 - in pe 32 tubes, punch the main tube with a 7 mm. Punch part number 1171/1159 and insert the water inlet.  The maximum permitted thickness of the main tube is 4,5 mm.

Application: used in tapes of 16-17 mm. Between 0,1 and 0,9 mm thick.

Tape outlet double joint for safety outlet

Materials: polypropylene.

Assembly: insert the tape through the tapered section of the part up to the stop and turn the nut anti-clockwise (towards the outside) until it compresses the tape.  Ensure that the tape is not twisted.

Application: used in tapes of 16-17 mm. Between 0,1 and 0,9 mm thick.

Combination PE tube-tape outlet

Materials: polypropylene.

Assembly: insert the tape through the tapered section of the part up to the stop and turn the nut anti-clockwise (towards the outside) until it compresses the tape.  Ensure that the tape is not twisted.

Application: used in tapes of 16-17 mm. Between 0,1 and 0,9 mm thick.