XRT connector

Settings

Per complete box pack In bag packs  
Ref. Diameter Box Units in box Bags in box Ref. Units in bag packs
1043 16 mm B 500 5 81043 100
1044 20 mm B 300 6 81044 50

The xrt models have an improved design of the safety rings that, even looking so simple, hold the tube with the same fiability and less water looses than with the safety ring, allowing the installation of this accesory with less effort. This system allows too that the accesory works with pipes with less thickness to standardized.
 

Body in abs.

Installation and use and measures same than in the other outlets.

Patented design.

You can REQUEST commercial or technical information about this product.

 

Related products

Connection

Manufactured in polypropylene. Connection in 25 manufactured in abs.

Assembly: accessory used to joint standard pe32 low pressure tubes for micro-irrigation. This type of accessory is inserted into the tube. The saw tooth pattern on the surface make easy to slide the tube up to the central stop, but prevents it from coming out. 

Use in standard pe32 tubes.

Reduced connection

Manufactured in polypropylene..

Assembly: accessory used to joint standard pe32 low pressure tubes for micro-irrigation. This type of accessory is inserted into the tube. The saw tooth pattern on the surface make easy to slide the tube up to the central stop, but prevents it from coming out.

Use in standard pe32 tubes.

Safety connection

The safety models are characterized by a mobil ring which increases in diameter if the tube shows signs of coming out of the accessory, thereby immobilizing the tube and preventing it from working loose. This system allows also to operate with thinner than standard tubes. 

Body in abs and ring y acetal resin.

Assembly and use the same as the previous types

reduced safety connection

The safety models are characterized by a mobil ring which increases in diameter if the tube shows signs of coming out of the accessory, thereby immobilizing the tube and preventing it from working loose. This system allows also to operate with thinner than standard tubes.

Body in abs and ring y acetal resin.

Assembly and use the same as the previous types.