Articles 1 - 7 total of 7

Self-compensating on-line dripper

The advantage of the self compensating drippers is that they allow to obtain the same flow with different work pressures, so they are indispensable in those installations where there are different pressures in different sections of the irrigation installation, giving the same and uniform flows in all of them.
The used raw materials in the production are resistant to the agrochemicals products and also to the effects of the UV radiations.

MATERIAL/S: durable silicone disk cleaning
APPLICATION: it can be connected to a microtube placing the irrigation flow to the desired place by using the microtube spike. re. 1026
ASSEMBLY: punch a locating hole in the tube using a 3 mm punch re. 1170/1158.

Conical on-line dripper

High uniformity and precision dripper. Suitable for nay kind of culture, (horticulture, vineyards or fruit culture).
The designs of the labyrinth give a turbulent flow system reducing the possible obstructions and increasing the uniformity of the emitter. The conical design makes easy to dismantle it allowing and easy cleaning in the case of any incident during filtration.
The used raw materials in the production are resistant to the agrochemicals products and also to the effects of the UV radiations.

ASSEMBLY: punch a locating hole in the tube using a 3 mm punch part number re. 1170/1158.
MATERIAL: prolypropylene copolymer
 

Highflow on-line dripper

This on-line high flow dripper gives you a wide flow possibilities by turning the upper part. It makes this dripper very suitable for almost any situation. Each turn is divided in 16 "clicks" for a better and proper adjustment.
By using with pressures over 1 bar, it is possible to obtain flows of over 100 l/h (see table).

CHARACTERISTICS: adjustable from 0 and 60 l/h. approx. with 1 bar pressure.

ASSEMBLY: perforate the pipe with a 3 mm punch re. 1170/1158.

Adjustable on-line dripper

Very used dripper due to it simplicity, easy cleaning, regulation possibility and low price. It precission and uniformity is not so high than in other models, due to the labyrinth and adjustment in “screw” way. However, this dripper is the most sold when it is not raquired a high precission on the irrigation flow.
The used raw materials in the production are resistant to the agrochemicals products and also to the effects of the UV radiations

CHARACTERISTICS: approximately adjustable between 0 and 6 l/h. at 1 bar of pressure.
ASSEMBLY: punch a locating hole in the tube using a 3 mm punch part number 1170/1158.

Dripper spike

The dripper spike is basically a spike with two sides. One of them is just a spike, the other one, a drip labyrinth. Both parts are sealed in a way that drips go through the spike to the land by the stick part of the spike, driving the water to your desired location.The dripper spike is very suitable for using with our self-compensating drippers, even though; they can also be connected directly to the tube.
By using water distributors, the dripper spike allows the distribution of water with a uniform flow.

APPLICATION: use with PVC 4 x 6 millimetres micro-tubing/ EVA 4.5 x 6 millimetres. Max. recommended pressure: 2 bar.
ASSEMBLY: the spike is 154 millimetres long.

Overflow stick

The highflow stick offers a wide range of flow that we can obtain by turning the top piece, what makes it perfect for almost any situation. Every turn is divided in 16 “clicks” for a more precise adjustment. With pressures higher to 1 bar we can obtain flow of more than 100 l/h (see table).

It offers a microtube outlet for his connection to the irrigation system.
The difference with the overflow dripper is that, having the same characteristics as emitter, we obtain the advantage that nailing in land we are obtaining higher height and its position will be more stable, because it is not affected by pipe movements. The height can be increased by adding the Ref.1125 simple stick (see picture), that allows to joint one stick to other and to the overflow stick. The height on the beginning is about 14 cms., and by adding sticks we will increase height and we could increase the action ratio of the irrigation or exceed the height of some plants.

Made in resistant material to agrochemicals and to the UV radiations effects.

CHARACTERISTICS: adjustable from 0 to 60 l/h, with aprox. 1 bar pressure.

In-line dripper

Material: polypropylene copolymer.

Turbulent operating mode.

Use in standard 12 and 16 millimetre tubes.