Micro-sprinklers
Micro-diffuser mister
CHARACTERISTICS: optimum operating pressure: 1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for low wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and connection piece).
Micro-diffuser spray
CHARACTERISTICS: optimum operating pressure: 1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for low wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and connection piece).
Micro-diffuser mister SET
CHARACTERISTICS: optimum operating pressure: 1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for low wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and connection piece).
Micro-diffuser SET spray
CHARACTERISTICS: optimum operating pressure: 1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for low wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and connection piece).
Micro-sprinklers
CHARACTERISTICS: the flow rate is identified by the rotor colour (moving part).
Blue: 30 l/h., Red: 50 l/h., Green: 80 l/h.,
Black: 120 l/h. Optimum operating pressure:
1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for reduced wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and
connection piece).
Insect repellent sprinkler
CHARACTERISTICS: the flow rate is identified by the rotor colour (moving part).
Blue: 30 l/h., Red: 50 l/h., Green: 80 l/h.,
Black: 120 l/h. Optimum operating pressure:
1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for reduced wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and
connection piece).
Micro-sprinkler SET
CHARACTERISTICS: the flow rate is identified by the rotor colour (moving part).
Blue: 30 l/h., Red: 50 l/h., Green: 80 l/h.,
Black: 120 l/h. Optimum operating pressure:
1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for reduced wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and
connection piece).
Insect repellent sprinkler SET
CHARACTERISTICS: the flow rate is identified by the rotor colour (moving part).
Blue: 30 l/h., Red: 50 l/h., Green: 80 l/h.,
Black: 120 l/h. Optimum operating pressure:
1.5 - 2.5 bar.
MATERIAL/S: rotor made from acetal resin for reduced wear and scoring. Body in ABS.
SUPPLIED: loose or in sets (fully assembled with 50 cm rod, PVC micro-tube and
connection piece).
Threaded diffuser
MATERIALS: manufactured in polystyrene.
ASSEMBLY: in PE tubing (punch with a 3 mm punch part number 1170/1158) or PVC tubing (5 mm punch).
IRRIGATION AREA: 180º semicircular sector.
Glass fibre rods
MATERIAL: manufactured in glass fibre.
CHARACTERISTICS: 4.5 mm diameter, 50 cm long rod. High rigidity.
APPLICATION: coupled to micro-sprinklers and micro-diffusers to raise them above the ground (see also simple pegs P/N 1125)