Articles 1 - 12 total of 41

Diversion outlets

Materials:  manufactured in polypropylene.

Assembly: punch the main tube with a 7 mm. Punch part number 1171/1159 and insert the water inlet.

Application: in standard pe 32 tubes with a maximum permitted thickness of 4,8 mm.

Safety outlet

Materials: body in abs and ring in acetal resin.

Characteristics: the safety models are characterized by a mobile ring which increases in diameter if the tube shows signs of coming out of the accessory,  thereby immobilizing the tube and preventing it from working loose.  This system allows the accessory also to operate with thinner than standard tubes.

Assembly:  same as the previous types.

Safety outlet double joint for safety outlet

Los modelos de "seguridad" se caracterizan por tener un anillo movil el cual va aumentando su diametro conforme la tuberia intenta salirse del accesorio,  bloqueando el movimiento de la misma e impidiendo que se suelte.  Este sistema permite que el accesorio tambien funcione con tuberias de espesores inferiores a los normalizados.

double joint

MATERIAL/S: manufactured in a specially formulated material to provide flexibility and resistance to shearing, chemical agents and temperature changes.
APPLICATION: in PE tubes (with wall thickness values not exceeding 4 millimetres) and PVC tubes. The rigidity of the PE HD and PVC tubes makes it imperative to fit this flexible accessory to avoid leaks. It is not indispensable in the case of PE tubes (low density), but is recommended since it ensures perfect sealing and allows the best part of the water delivery section of the water outlets to be used. It is used in conjunction with water outlets for double joint part numbers 1133, 1145, 1105, 1056, 1058, 1041, 1042 and valves 1096 and 1097.
ASSEMBLY: punch a 17 millimetres opening in a tube. Remove roughness and burrs and insert the tapered part of the joint, then insert the water outlet.

XRT outlet

The xrt models have an improved design of the safety rings that, even looking so simple, hold the tube with the same fiability and less water looses than with the safety ring, allowing the installation of this accesory with less effort. This system allows too that the accesory works with pipes with less thickness to standardized.
 

Body in abs.

Installation and use and measures same than in the other outlets.

Patented design.

Connection

Manufactured in polypropylene. Connection in 25 manufactured in abs.

Assembly: accessory used to joint standard pe32 low pressure tubes for micro-irrigation. This type of accessory is inserted into the tube. The saw tooth pattern on the surface make easy to slide the tube up to the central stop, but prevents it from coming out. 

Use in standard pe32 tubes.

Reduced connection

Manufactured in polypropylene..

Assembly: accessory used to joint standard pe32 low pressure tubes for micro-irrigation. This type of accessory is inserted into the tube. The saw tooth pattern on the surface make easy to slide the tube up to the central stop, but prevents it from coming out.

Use in standard pe32 tubes.

XRT connector

The xrt models have an improved design of the safety rings that, even looking so simple, hold the tube with the same fiability and less water looses than with the safety ring, allowing the installation of this accesory with less effort. This system allows too that the accesory works with pipes with less thickness to standardized.
 

Body in abs.

Installation and use and measures same than in the other outlets.

Patented design.

Safety connection

The safety models are characterized by a mobil ring which increases in diameter if the tube shows signs of coming out of the accessory, thereby immobilizing the tube and preventing it from working loose. This system allows also to operate with thinner than standard tubes. 

Body in abs and ring y acetal resin.

Assembly and use the same as the previous types

reduced safety connection

The safety models are characterized by a mobil ring which increases in diameter if the tube shows signs of coming out of the accessory, thereby immobilizing the tube and preventing it from working loose. This system allows also to operate with thinner than standard tubes.

Body in abs and ring y acetal resin.

Assembly and use the same as the previous types.